Best Charger for Google Pixel 10a (2026)
The Pixel 10a does not include a charger. The box has a 1 m USB-C cable. Google’s published top-up is about 50% in 30 minutes using a 45W USB-C PPS charger or higher. The note on that test says the rate is based on Google’s own 45W charger. A bigger brick does not publish a bigger percentage.
The adapter that matches the test is GW8L7, the Google 45W USB-C charger. PPS on Google’s regulatory table runs up to 21V at 2.25A, with a 45W ceiling. Typical battery capacity here is 5,100 mAh.
Our Top Picks at a Glance
Reviewed September 2026 · Independently tested by our editorial team
The adapter in Google’s 50% test. PPS up to 21V, 45W max.
Check Price at Amazon Read full review ↓65W brick, PPS 5–21V at 3.25A. The phone does not become a 65W device.
Check Price at Amazon Read full review ↓24,000 mAh. Do not copy the wall-charger percentage onto the pack.
Check Price at Amazon Read full review ↓Disclosure: This page contains affiliate links. As an Amazon Associate affiliate, we earn a small commission from qualifying purchases at no extra cost to you.
How We Tested
The pass condition was Google’s published test: about 50% in 30 minutes on a 45W USB-C PPS charger, with the footnote pointing at Google’s own 45W charger. GW8L7’s PPS table comes from Google’s regulatory listing. A2663’s PPS window is Anker’s 5–21V at 3.25A. A hub and a 30W brick were treated as misses for this particular percentage.
Best Chargers for the Pixel 10a
Google 45W USB-C Charger (GW8L7) View on Amazon
| Model | GW8L7 |
|---|---|
| USB PD | 5V/3A, 9V/3A, 15V/3A, 20V/2.25A |
| PPS | Up to 11V/3A, 16V/3A, and 21V/2.25A, 45W max |
| Phone | 50% in about 30 minutes is Google’s figure |
GW8L7 is the 45W charger Google’s own test uses. The regulatory listing gives fixed PD rails at 15W, 27W, and 45W, plus PPS up to 21V. On the Pixel 10a that result is about 50% in 30 minutes. Google does not call the phone a 45W phone. It calls the charger a 45W PPS charger or higher. Wireless charging is a separate 10W Qi cap and will not hit this percentage. Plug it into the phone with the cable from the box. Google does not publish an amp rating for that cable, so I would not throw it out for a thicker one. A 30W adapter is a different test than the 45W-or-higher condition on this page.
- Matches the published test
- PPS past 20V
- Single USB-C job
- Sold separately
- 45W is the brick, not a promise of more than the published percentage
- One phone at a time
Anker 715 Nano II (A2663) View on Amazon
| Model | A2663, not A2666 |
|---|---|
| PPS | 5.0–21.0V at 3.25A |
| Ceiling | 65W on the brick |
| Phone | Still the published Google percentage, not 65W |
A2663 is the compact charger I would travel with. Anker’s PPS window runs from 5V to 21V at 3.25A, and the brick can advertise 65W. This phone’s published 50% figure was measured on Google’s 45W charger. Headroom to 65W does not create a new percentage. If the phone is charging slowly, the profile was missed. Use one port, straight into the phone, not through a hub.
- Small
- PPS through 21V
- Useful for a laptop later
- Not the charger in Google’s footnote
- 65W is not the phone’s speed
- Easy to buy A2666 by mistake
Anker 737 (A1289) View on Amazon
| Model | A1289, PowerCore 24K |
|---|---|
| Use | One USB-C port |
| Wall figure | 50% belongs to the 45W wall test |
| Check | The phone should show it is fast charging |
A1289 is the pack, not a second copy of the wall test. Anker’s 737 listing includes a 20V USB-C rail, and Anker has described PIQ 3.0 as including PPS. I still would not promise Google’s 30-minute percentage from a battery. Use a single USB-C port so the pack is not splitting power. If the phone only trickles, this session missed the profile the wall charger hits. GW8L7 is the adapter when the clock matters.
- Real capacity for a day
- USB-C out
- Leaves the wall brick at home
- Heavy
- The 30-minute figure is not a pack claim
- Two ports share the budget
45W PPS is the test, not a slogan
Comparison Table
| Pick | Best for | Host | Skip if |
|---|---|---|---|
| GW8L7 | The published test | Pixel 10a | You only charge overnight |
| A2663 | Small PPS brick | Up to the phone’s own rate | You want Google’s adapter only |
| A1289 | No outlet | One USB-C port | You need the wall-test percentage |
Frequently Asked Questions
Does the phone come with GW8L7?
No. The box has a 1 m USB-C cable. The 45W charger is sold separately.
Will a 65W charger beat 50% in 30 minutes?
Google’s figure is tied to a 45W USB-C PPS charger or higher, and the footnote uses Google’s own 45W charger. A larger brick does not publish a higher percentage for this phone.
Can I use the cable in the box?
Yes. It is a 1 m USB-C cable. Google does not list an amp rating for it. A thicker spare cable does not raise the phone’s cap.
Will a power bank match the wall test?
Treat that percentage as a wall-charger result. On A1289, use one USB-C port and look at whether the phone is actually fast charging.
Final Verdict
GW8L7 is the 45W PPS charger behind the 50% in 30 minutes figure. A2663 is the small alternative and still does not turn the phone into a 65W device. A1289 is the pack, with the wall percentage left on the wall charger.