Best Wireless Charger for Google Pixel 11 Pro (2026)
Google lists the Pixel 11 Pro at Pixelsnap wireless charging up to 25W. The body is 152.7 × 71.9 × 8.4 mm and 204 g. Typical battery capacity is 4,850 mAh, minimum 4,707 mAh. The rear cameras are a 50 MP wide, a 48 MP ultrawide, and a 48 MP 5x. The 25W wireless line on the Pixelsnap store page still depends on a 35W or higher USB-C adapter. The phone box has a 1 m cable and no charger.
The puck Google names for that 25W line is the Google Pixelsnap Charger, model GH5UG. Magnets are in the phone, so a magnet case is not what aligns it. The adapter is sold separately. A Qi2.2 puck rated at 25W still has to live with this phone’s own 25W listing. It does not add watts on top.
Our Top Picks at a Glance
Reviewed October 2026 · Specs checked against the manufacturer pages named below
GH5UG, up to 25W on the Pixel 11 Pro with a 35W or higher adapter.
Check Price at Amazon Read full review ↓EP-P2900 is rated Qi2.2 25W. Samsung says the phone’s own wireless spec still sets the session.
Check Price at Amazon Read full review ↓EP-T4511 is a 45W PPS adapter, the class EP-P2900’s footnote describes.
Check Price at Amazon Read full review ↓Disclosure: This page contains affiliate links. As an Amazon Associate affiliate, we earn a small commission from qualifying purchases at no extra cost to you.
How We Tested
Pixel 11 Pro size, cameras, battery, and the 25W Pixelsnap line come from Google’s hardware spec. The 35W adapter condition comes from the Pixelsnap store page. EP-P2900’s rating and supply note come from Samsung. EP-T4511’s rails come from Samsung UK.
The wireless chargers
Google Pixelsnap Charger View on Amazon
| Model | GH5UG |
|---|---|
| 25W line | Pixel 11, Pixel 11 Pro, Pixel 11 Pro XL, and Pixel 10 Pro XL, with a 35W or higher USB-C adapter |
| 15W line | Pixel 10, Pixel 10 Pro, and Pixel 10 Pro Fold, with a 20W or higher adapter |
| Box | Puck and a 1 m USB-C cable. Adapter sold separately |
| Size | 56 mm across, 5.4 mm thick, 54.5 g |
Google’s store page puts the Pixel 11 Pro in the 25W group with the Pixel 11 and the Pixel 11 Pro XL, all of them on a 35W or higher adapter. The 15W group on that page is Pixel 10, Pixel 10 Pro, and Pixel 10 Pro Fold. This Pro is 152.7 mm tall and 204 g, with a typical 4,850 mAh battery.
The puck is 56 mm across and 5.4 mm thick, with a 1 m cable. Input on the safety page is 5V, 9V, and 15V at 3A. The 25W claim is tied to the bigger adapter. Wired charging on this phone is the other test: about 55% in 30 minutes on the 45W Google charger.
- Google lists this puck at 25W for the Pixel 11 phones
- The magnets are in the phone
- The cable is in the box
- A 45W USB-C adapter clears the 35W line
- No adapter in the box
- A 20W adapter is the 15W line on that page
- Qi2.0 devices are listed at 15W
- It is a puck, not a stand
Samsung EP-P2900 Magnet Wireless Charger View on Amazon
| Model | EP-P2900. Qi2.2, 25W on the charger |
|---|---|
| Size | 55.5 × 55.5 × 4.4 mm, 52.23 g, 1.5 m cable |
| Input | 20V at 2.25A |
| Supply | An official 45W adapter, or a higher PPS supply at 20V, for the charger’s 25W line |
| Speed | Samsung says the session follows the phone’s own wireless specification |
Samsung rates EP-P2900 at Qi2.2 25W, 4.4 mm thick, with a 1.5 m cable and a 20V/2.25A input. The footnote wants an official 45W adapter, or a higher PPS supply at 20V, before the charger is providing up to 25W. Speed, Samsung says, follows the device.
This phone’s wireless listing is already 25W, and the magnets are Pixelsnap, in the body. Samsung’s Magnet Case sentence is the Galaxy line on that page. Do not paste a Galaxy charge-time onto this Pixel. Keep cards and a compass off the puck. Samsung asks for 15 cm from an implanted medical device.
- Qi2.2 25W is printed on the puck
- 4.4 mm, with a 1.5 m cable
- The 45W supply is named
- A Pixel with Pixelsnap magnets can sit on a Qi2 puck
- 25W on the puck is not a new ceiling for the phone
- The Galaxy line on the page asks for a Magnet Case
- Magnets and cards, compass, and NFC do not mix
- A 25W wall adapter is below the footnote
Samsung EP-T4511 45W charger View on Amazon
| Model | EP-T4511. The UK page is the box without a cable |
|---|---|
| PPS | 5–20V at 2.25A. 45W max |
| PDO | 9V/3A, 15V/3A, 20V/2.25A |
| Here | The wall side of a wireless puck that asks for 45W |
| Cable | Not in that box. The puck brings its own |
EP-T4511 publishes PPS from 5V to 20V at 2.25A, and a 20V PDO at 2.25A. That is the 45W class in the EP-P2900 footnote, and it matches the puck’s 20V input. The UK box does not include a cable. The puck has one.
This brick has no coil. It does not replace GH5UG. On the Google puck, the supply Google names is 35W or higher, and GW8L7 is the 45W charger in that sentence. EP-T4511 is here as the supply for the Samsung puck.
- 45W PPS, which is the supply class EP-P2900 names
- Single port
- 20V at 2.25A matches the puck’s input line
- Printed PPS, not a guess
- No coil
- PPS stops at 20V
- No cable in the without-cable box
- It does not change the phone’s wireless listing
Same 25W puck rule, on a 4,850 mAh Pro body
Comparison Table
| Piece | Coil | Supply |
|---|---|---|
| GH5UG | Up to 25W on this phone | 35W or higher USB-C |
| EP-P2900 | Qi2.2 25W on the charger | 45W, or higher PPS at 20V |
| EP-T4511 | None | 45W PPS for the Samsung puck |
Frequently Asked Questions
Is the battery 4,985 mAh?
This spec says typical 4,850 mAh, minimum 4,707 mAh.
Does a magnet case add watts?
Alignment on this phone is Pixelsnap, in the body. The 25W listing does not depend on a case.
Why a Samsung puck?
EP-P2900 is Qi2.2 at 25W, and this phone’s wireless listing is 25W. The session still follows the phone. The supply has to be the 45W class Samsung prints.
Where is the 55% figure?
About 55% in 30 minutes is the wired test on the 45W Google charger. Wireless is the 25W line.
Final Verdict
GH5UG is the Pixelsnap puck for the Pixel 11 Pro’s 25W listing, with a 35W or higher adapter and the magnets already in the 152.7 mm body. EP-P2900 is a Qi2.2 puck rated 25W, which matches the phone’s listing and still needs a 45W supply. EP-T4511 is that 45W PPS adapter for the Samsung puck.