Best Charger for Google Pixel 11 (2026)
Google’s Pixel 11 spec lists a typical 4,985 mAh battery and fast charging up to 55% in about 30 minutes using a 30W USB-C PPS charger or higher. The footnote says that wired rate is based on the Google 45W USB-C charger in a wall socket, and that results may be slower. The phone is 152.8 × 72.0 × 8.6 mm and 197 g. The box has a 1 m USB-C cable and no charger. Pixelsnap wireless charging is a separate 25W line.
The brick in that footnote is the Google 45W USB-C Power Charger, model GW8L7. It is 45W, with PPS up to 11V at 3A, 16V at 3A, and 21V at 2.25A. A 25W adapter sits under the 30W PPS line in the spec. A charger whose PPS stops at 20V can still be 45W, and it is not the charger named in the footnote.
Our Top Picks at a Glance
Reviewed October 2026 · Specs checked against the manufacturer pages named below
Model GW8L7, the 45W USB-C charger in Google’s wired-rate footnote.
Check Price at Amazon Read full review ↓PPS to 20V at 3.25A, 65W, one port. The Pixel footnote still names Google’s 45W charger.
Check Price at Amazon Read full review ↓A real 25W PPS adapter. Google’s 55% line asks for 30W PPS or higher.
Check Price at Amazon Read full review ↓Disclosure: This page contains affiliate links. As an Amazon Associate affiliate, we earn a small commission from qualifying purchases at no extra cost to you.
How We Tested
Battery, size, the 55% line, and footnote 9 come from Google’s Pixel 11 hardware spec. GW8L7’s rails come from Google’s 45W charger spec. PE2201UJ comes from its manual. EP-T2510 comes from Samsung UK. No separate timing was run.
The wired chargers
Google 45W USB-C Power Charger View on Amazon
| Model | GW8L7 |
|---|---|
| PD | 5V/3A, 9V/3A, 15V/3A, 20V/2.25A |
| PPS | Up to 11V/3A, 16V/3A, 21V/2.25A, max 45W |
| Box | Charger and a safety guide. No USB-C cable |
| Pixel note | Google’s wired-rate footnote uses this 45W charger in a wall socket |
Google’s charger spec lists USB PD 3.1 PPS, max 45W. The Pixel 11 line is 55% in about 30 minutes with a 30W PPS charger or higher, and footnote 9 ties that rate to the 45W Google charger on wall power. Model GW8L7. No cable in the box. The phone’s cable is USB-C to USB-C.
The phone’s spec does not say the Pixel 11 draws 45W. It says 30W PPS or higher, and the test charger is the 45W one. Wireless stays on the Pixelsnap line, up to 25W, which is not this brick.
- The charger named in the Pixel wired-rate footnote
- PPS includes 11V at 3A and 21V at 2.25A
- 45W is enough for the S26+ listing and for a 35W Pixelsnap supply
- One USB-C port
- No cable in the box
- 45W does not raise a phone whose own listing is 25W or 30W
- It will not run a 65W laptop at 65W
- Snow housing, one color on the spec page
Spigen ArcStation Pro GaN 651 View on Amazon
| Model | PE2201UJ on the manual. One USB-C |
|---|---|
| PDO | 5V/3A, 9V/3A, 15V/3A, 20V/3.25A |
| PPS | 5–20V at 3.25A. Total 65W max |
| Size | 28.5 × 40.5 × 50.5 mm, 96 g, on that manual |
| Input | 100–240V, 1.5A |
The manual lists PPS from 5V to 20V at 3.25A and 65W on one USB-C port. That is above the 30W PPS line in the Pixel spec. It does not include the 21V PPS step Google prints on GW8L7.
Do not move the 55% figure onto this brick. Google’s footnote attaches that rate to the 45W Google charger. This one is the travel GaN option when the requirement you can verify on the label is PPS and more than 30W.
- Single port, so 65W is not shared
- PPS runs to 20V at 3.25A
- GaN, and the manual prints the rails
- 20V at 3.25A is the usual 65W laptop step
- 3.25A is more than a 3A cable can carry at 20V
- PPS stops at 20V
- No second port
- Cable is not the point of this brick
Samsung EP-T2510 25W charger View on Amazon
| Model | EP-T2510. USB-C. Cable depends on the suffix |
|---|---|
| Ceiling | 25W. PD 3.0 PPS |
| PDO | 9V at 2.77A. 5V at 3A on the listings that print it |
| PPS | 3.3–11V at 2.25A, or 5–11V at 2.25A on later production. Samsung says to read the engraving |
| Phone | Galaxy S26 wired charging is listed at up to 25W |
EP-T2510 is 25W with PPS to 11V at 2.25A. It will feed a USB-C phone. It does not meet the 30W PPS-or-higher condition written next to the Pixel 11’s 55% sentence.
Use it when the bag already has Samsung’s 25W brick and the goal is a charge, not the published 30-minute figure. The 45W Google charger remains the one in the footnote. Cable inclusion on EP-T2510 depends on the suffix.
- 25W is this phone’s listed wired ceiling
- PPS through 11V is the rail Samsung prints
- One USB-C port
- GaN on Samsung’s own 25W page
- A 45W brick does not raise the S26’s listed 25W ceiling
- Some boxes omit the cable
- PPS minimum voltage changed by production date
- 25W is under a 30W PPS phone test
30W PPS or higher, tested on the 45W Google charger
Comparison Table
| Adapter | PPS | Against the spec line |
|---|---|---|
| GW8L7 | To 21V at 2.25A, 45W | The charger in footnote 9 |
| PE2201UJ | 5–20V at 3.25A, 65W | Above 30W. Not the footnote charger |
| EP-T2510 | To 11V, 25W | Under the 30W line |
Frequently Asked Questions
Does the Pixel 11 charge at 45W?
Google’s sentence is 30W PPS or higher, about 55% in 30 minutes, measured on the 45W Google charger. It does not say the phone pulls 45W.
Is a 25W Samsung adapter enough?
It is under the 30W PPS line next to that 55% figure. It still charges the phone.
Where is the cable?
The phone box has a 1 m USB-C cable. GW8L7 does not include one.
Does this cover wireless charging?
Pixelsnap is listed separately at up to 25W. These three are wall adapters.
Final Verdict
GW8L7 is the 45W USB-C charger Google’s footnote uses for the Pixel 11’s wired rate, about 55% in 30 minutes on a 4,985 mAh typical battery. PE2201UJ is 65W PPS that stops at 20V. EP-T2510 is a 25W PPS adapter, under the 30W line in the spec.