Best Charger for Google Pixel 11 Pro (2026)
Google’s Pixel 11 Pro spec lists a typical 4,850 mAh battery, minimum 4,707 mAh, and fast charging up to 55% in about 30 minutes using a 30W USB-C PPS charger or higher. The footnote again bases that wired rate on the Google 45W USB-C charger in a wall socket. The body is 152.7 × 71.9 × 8.4 mm and 204 g, with a 6.3-inch display. The box is the phone and a 1 m USB-C cable.
That footnote points at the Google 45W USB-C Power Charger, model GW8L7. PPS on the charger spec goes to 21V at 2.25A, max 45W. The phone’s published test is still the 30W PPS condition and the 55% figure. A 45W PPS brick whose window stops at 20V is a different supply.
Our Top Picks at a Glance
Reviewed October 2026 · Specs checked against the manufacturer pages named below
GW8L7, the 45W charger named in the wired-rate footnote. Battery typical 4,850 mAh.
Check Price at Amazon Read full review ↓Samsung EP-T4511 is 45W with PPS from 5V to 20V at 2.25A.
Check Price at Amazon Read full review ↓One USB-C port lists 20V at 3.35A. The PPS window is not in that output table.
Check Price at Amazon Read full review ↓Disclosure: This page contains affiliate links. As an Amazon Associate affiliate, we earn a small commission from qualifying purchases at no extra cost to you.
How We Tested
Pixel 11 Pro size, battery, and the 55% footnote come from Google’s hardware spec. GW8L7 comes from Google’s charger spec. EP-T4511 comes from Samsung UK. A2669’s port table comes from Anker’s product page.
The wired chargers
Google 45W USB-C Power Charger View on Amazon
| Model | GW8L7 |
|---|---|
| PD | 5V/3A, 9V/3A, 15V/3A, 20V/2.25A |
| PPS | Up to 11V/3A, 16V/3A, 21V/2.25A, max 45W |
| Box | Charger and a safety guide. No USB-C cable |
| Pixel note | Google’s wired-rate footnote uses this 45W charger in a wall socket |
The battery line is 4,850 mAh typical, and the charge line is 55% in about 30 minutes at 30W PPS or higher. Footnote 9 says the rate used the Google 45W charger on wall power. GW8L7’s PPS list is 11V/3A, 16V/3A, and 21V/2.25A. No cable in that box.
This is a smaller battery than the 4,985 mAh figure on the Pixel 11 spec, in a 152.7 mm body. The 55% sentence is similar. It is still this phone’s footnote, on this phone’s battery. Wireless Pixelsnap remains up to 25W and is not a wall adapter.
- The charger named in the Pixel wired-rate footnote
- PPS includes 11V at 3A and 21V at 2.25A
- 45W is enough for the S26+ listing and for a 35W Pixelsnap supply
- One USB-C port
- No cable in the box
- 45W does not raise a phone whose own listing is 25W or 30W
- It will not run a 65W laptop at 65W
- Snow housing, one color on the spec page
Samsung EP-T4511 45W charger View on Amazon
| Model | EP-T4511. USB-C. The UK page is the version without a cable |
|---|---|
| PDO | 9V/3A, 15V/3A, 20V/2.25A |
| PPS | 5–20V at 2.25A. 45W max |
| SFC 2.0 | Samsung: for Galaxy S25 and later, the 3A cable in the phone box is enough |
| Standby | Under 5 mW on the UK page |
EP-T4511 publishes PPS at 5–20V and 2.25A, plus a 20V PDO at 2.25A. Wattage clears 30W. The top PPS voltage is 20V. GW8L7’s spec includes 21V at 2.25A. Those are different profiles.
Google attaches the 55% result to the 45W Google charger. Use EP-T4511 as a 45W PPS source, then treat the lock screen and the actual session as the result. Samsung’s 3A-cable note is about their Super Fast Charging phones. The cable in the Pixel box is the one to use here.
- 45W PPS, which is the S26+ wired ceiling
- The included 3A phone cable is what Samsung names for S25 and later
- Single port
- PPS is printed, not implied
- PPS stops at 20V, not 21V
- On a phone listed at 25W, the extra wattage is unused
- No cable in the without-cable box
- 45W at 20V is 2.25A, so it is not a 65W laptop brick
Anker Prime 67W charger View on Amazon
| Model | A2669, GaN, three ports |
|---|---|
| One USB-C | 5V/3A, 9V/3A, 12V/3A, 15V/3A, 20V/3.35A, 67W max |
| Shared | Two ports 65W max. All three 64.5W max |
| USB-A | 22.5W max on that port alone |
| PPS | Named on Anker’s support page. The output table itself is fixed PDOs |
Anker lists each USB-C port, alone, up to 20V at 3.35A, 67W. Two ports drop to 65W shared. A support page names PPS. The output table does not list a PPS voltage range, so this is not a verified 21V PPS source.
It clears 30W easily on one port. It is not the charger in Google’s footnote, and the 55% figure stays on GW8L7. Unplug the other ports if the laptop-style shared limit is not what you want next to the phone.
- 20V at 3.35A on one USB-C port
- GaN, and the single-port line is above a 65W laptop brick
- A second port is still listed at 65W max
- USB-A is there for a phone that is not on USB-C
- A second device pulls the shared ceiling down
- 20V at 3.35A needs a cable rated above 3A for the full figure
- The PPS voltage window is not in the output table
- Folding plugs are the US version
4,850 mAh, same 30W PPS test, 21V only on the Google brick
Comparison Table
| Adapter | What is printed | 55% footnote |
|---|---|---|
| GW8L7 | 45W, PPS to 21V/2.25A | This is the charger named there |
| EP-T4511 | 45W, PPS to 20V/2.25A | Different profile |
| A2669 | 20V/3.35A alone | PPS window not in the table |
Frequently Asked Questions
Is the battery the 4,985 mAh one?
This spec says typical 4,850 mAh, minimum 4,707 mAh.
Why does 21V matter?
GW8L7 prints a 21V PPS step. EP-T4511’s PPS line ends at 20V. The footnote names the Google charger.
Can the Anker do PPS?
Anker’s support page names PPS. The product output table does not list the PPS voltages. The table’s fact is 20V at 3.35A on one USB-C port.
Is wireless included?
Pixelsnap is listed at up to 25W on the same battery block. These picks are wall chargers.
Final Verdict
GW8L7 is the 45W charger in the Pixel 11 Pro footnote: about 55% in 30 minutes, on a typical 4,850 mAh battery, with PPS to 21V. EP-T4511 is 45W PPS that ends at 20V. A2669 is 20V at 3.35A on one port, and its PPS window is not printed in the output table.